RC Jets

RC Turbine Jets for Beginners: Choosing Your First Turbine Jet

New to turbine jets? See what a first turbine jet should look like, how much it costs, which rules apply and why an EDF jet often comes first.

On this page
  1. Start with an EDF jet, or fly with a turbine mentor
  2. What a good first turbine jet looks like
  3. What it costs
  4. Field and training
  5. Rules and paperwork
  6. Common first-jet mistakes
  7. Questions people ask
  8. Next steps

A turbine jet is a big step up from a propeller plane. A first turbine should be a forgiving sport jet, flown by someone who already handles fast jets well. This guide covers what to look for, what it costs and what you’ll need before the first flight.

Start with an EDF jet, or fly with a turbine mentor

Many turbine pilots came up through propeller planes and then electric ducted fan (EDF) jets. That path is common for good reasons. An EDF jet teaches the things a turbine jet demands: high-speed handling, landing approach and energy management. It’s also cheaper to crash and easier to repair.

A reasonable starting point before a turbine is:

  • Comfortable flying fast, low-wing propeller planes
  • Some EDF jet experience
  • Familiarity with tricycle gear and retracts, if your jet has them

What a good first turbine jet looks like

  • Forgiving wing and moderate landing speed. A sport jet that lands at a sensible speed gives you more time to correct mistakes.
  • Tricycle gear. Most sport jets use it, and it makes ground handling easier.
  • Retracts with brakes, if you want them. Retracts add realism and reduce drag, but they add mechanical complexity.
  • Airbrakes or flaps. You need a way to slow down without relying on engine power alone.
  • Optional gyro stabilisation. Many sport jets use it to smooth handling.
  • An engine sized for the airframe. Typical first-jet engines are in the 8 to 12 kgf range, with a thrust-to-weight ratio of roughly 0.7:1 to 1:1.

Typical first jets are roughly 1.6 to 2.2 m (about 5 to 7 ft) in wingspan and 6 to 12 kg at takeoff. Avoid tiny jets. They’re often faster and less forgiving than a mid-size sport jet.

What it costs

Budget for more than the airframe and engine:

Item Typical cost
Airframe About $1,500 to $4,000
Turbine engine About $1,500 to $3,500
Servos, retracts, radio and receiver Varies
Fuel pump, hopper tank and ECU charger Varies
Fire extinguisher, hearing protection and transport Varies
Complete first setup Often $5,000 to $10,000

Used engines can be a good deal, but check the run hours and service history before you buy. Ask for ECU logs if you can get them.

Field and training

  • Runway or strip. A paved or very smooth grass strip is best. Many guides suggest at least 150 to 200 m (about 500 to 650 ft), and your model’s manual may ask for more.
  • Training. Plan on training flights with an experienced jet pilot, ideally with a buddy-box setup so the instructor can take over.
  • Field kit. A CO2 fire extinguisher, a fuel pump, Jet A-1 and turbine oil, the ECU charger, a helper or restraint, and hearing protection.

Rules and paperwork

Many people ask whether they need a license. In many countries, flying a model aircraft doesn’t require a pilot’s license, but other requirements can apply:

  • US, AMA sites: AMA sites require a turbine waiver to fly turbine models. Check the current AMA documents for the process.
  • Elsewhere: Check your national model flying body and aviation authority. Registration, insurance and site approval can all apply.
  • Local rules: Many public parks don’t allow turbine jets at all, and noise ordinances are common.

Common first-jet mistakes

  • Buying the smallest jet you can find. Tiny jets are often faster and less forgiving than a mid-size sport jet.
  • Forgetting throttle lag. A turbine takes about 2 to 5 seconds to spool from idle to full, so plan approaches and go-arounds around that delay.
  • Buying a used engine without records. Ask for run hours and service history.
  • Skipping the failsafe check. Confirm the radio failsafe sets the throttle to idle or off, and range-check before each session.
  • Planning too little fuel reserve. A flame-out on approach leaves no power for a go-around. See RC jet flight time.

Questions people ask

What are some good RC jet planes for beginners?

Start with an EDF jet rather than a turbine. EDF jets cost less, are quieter and are more forgiving to learn on. The E-flite Habu is one small EDF jet often mentioned as a first jet. Once you’re comfortable with an EDF, a sport turbine jet is the usual next step.

What is the best RC trainer plane for beginners?

A trainer is a propeller plane, not a turbine. For a first RC aircraft of any kind, a stable electric trainer with a simple setup is the common advice. A turbine jet is not a trainer. Your local club can point you to trainers that suit your flying site.

Do I need a license to fly RC planes?

Usually not a pilot’s license. In many places, though, you may need club membership, registration, insurance or a turbine waiver. Check your national authority and your club’s rules before you buy.

What is the best budget RC plane for beginners?

For the lowest cost of entry, an electric trainer or a small EDF jet is the usual starting point, not a turbine. Budget for batteries, a charger and spares too. For the price tiers from EDF to turbine, see what is the most expensive RC jet?

Next steps

Read how to start an RC jet turbine safely before your first session. Then check how loud RC jet engines are to plan your hearing protection, and the RC jet engines overview for the bigger picture. For the fuel side, see what fuel RC jet engines use.

The complete guide to rc jets

RC Jet Engines: Turbines, EDFs and How to Get Started
Read the guide

Keep exploring

Guides from other topics

All topics →