RC Jets

RC Rocket Planes: Flying with Rocket Motors

RC rocket planes use model rocket motors for boost. Learn how motor classes work, common rocket glider kits, and the safety and legal limits to know.

On this page
  1. What an RC rocket plane is
  2. Reading rocket motor codes
  3. Rocket-boosted gliders: an example kit
  4. Rocket-assisted speed builds
  5. Safety and rules
  6. Where to start
  7. Next steps

An RC rocket plane is a niche part of the hobby: an airframe that gets a boost from a model rocket motor, then glides or flies under radio control. It’s exciting, but rocket motors can’t be throttled, they add heat and fire risk, and the rules around them are strict. Here’s what the term covers and what to check first.

What an RC rocket plane is

Most RC rocket planes are rocket-boosted gliders. A rocket motor lifts the plane quickly to altitude or speed. Once the motor burns out, the pilot flies the glide under radio control. Some builders also add a rocket motor to an electric or foam speed plane for a short burst of extra speed.

A rocket is not a jet. A rocket motor carries its own oxidiser, so it doesn’t need air. A jet turbine breathes air and burns kerosene. The two work differently and call for different precautions. The RC jet engines overview covers the main jet power options.

Reading rocket motor codes

Model rocket motors use a letter for total impulse class. Each letter roughly doubles the total impulse of the one before:

Class Total impulse (N·s)
A 1.26 to 2.50
B 2.51 to 5.00
C 5.01 to 10.00
D 10.01 to 20.00
E 20.01 to 40.00
F 40.01 to 80.00
G 80.01 to 160.00

The code on a motor works like this. In a motor marked C6-5, C is the class, 6 is the average thrust in newtons, and 5 is the delay in seconds before any ejection charge fires. Common A to E motors burn for roughly 0.5 to 3 seconds.

Motors can’t be throttled. Once lit, thrust follows the motor’s curve until it burns out, so the airframe and launch need to be planned around that.

Rocket-boosted gliders: an example kit

Apogee Components’ Aurora Clipper is a useful example of the category. The maker lists it at 33 inches long with a 23-inch wingspan, designed for 24 mm E-class motors. It’s a glider, not a beginner’s RC plane. The maker rates it as skill level 5 on its own complexity scale and says it needs servos, a receiver and a transmitter with elevon mixing that you supply yourself. The maker also advises getting hands-on help from an experienced RC pilot, since trimming a glider takes practice.

The lesson from this kit is that the rocket adds risk on top of normal RC flying. Learn the RC side first.

Rocket-assisted speed builds

Some hobbyists strap a model rocket motor onto a foam or electric speed plane for a burst of speed. These builds are less common and more demanding.

  • Mounting. The motor needs a positive retainer and heat protection. Foam and thin composites can soften or fail near the motor.
  • Motor size matters. In one Flite Test experiment, a D-class motor boosted an EPO foam plane well. A much larger F-class motor broke the airframe in mid-flight. The airframe set the limit, not the pilot.
  • Fire. Burning motors and debris can start fires in dry grass. Plan fire precautions for every launch.

Safety and rules

  • Use certified motors only. Commercially made motors from established manufacturers are the standard. Homemade propellant is dangerous and often illegal, and this article doesn’t cover it.
  • Ignite only from an approved setup. Follow the motor maker’s instructions and the NAR Model Rocket Safety Code, and keep spectators back.
  • Launch in safe conditions. In dry grass, use fire precautions.
  • Check your club and national rules. Many clubs restrict or ban rocket motors on RC aircraft. Model rockets in the US fall under FAA rules, and larger high-power motors need certification. Check the current rules for your country before you buy or fly.
  • Don’t launch from a flying model. Dropping or firing rockets or projectiles from an airborne RC aircraft is generally not allowed under club and national rules, and it’s dangerous to people on the ground.

Where to start

  1. Get comfortable with RC flying first. A rocket glider adds risk on top of the flying itself.
  2. Choose a commercial kit made for rocket boost, and use the motor the maker recommends.
  3. Find a club. Experienced members can help with trimming, motor choice and field rules.

Next steps

For the bigger jet picture, see RC jet engines: turbines, EDFs and how to get started. Rocket motors and turbines are different tools. How an RC jet turbine works explains the turbine side.

The complete guide to rc jets

RC Jet Engines: Turbines, EDFs and How to Get Started
Read the guide

Keep exploring

Guides from other topics

All topics →