Start here · Essential guide
RC Plane Electronics: A Complete Guide to Every Component
A complete guide to RC plane electronics: how the transmitter, receiver, servos, ESC, BEC, motor, and LiPo battery connect, with safety basics for each part.
Build and Set Up
Transmitters, receivers, binding, channels, motors, props, LiPo batteries, failsafe and rates.
Start here · Essential guide
A complete guide to RC plane electronics: how the transmitter, receiver, servos, ESC, BEC, motor, and LiPo battery connect, with safety basics for each part.
No, not every RC transmitter works with every receiver. The radio and receiver must share a protocol. Learn the common protocols and how to check compatibility.
Choose an RC plane transmitter and receiver by channel count, protocol, radio features, and receiver type, with a checklist to use before you buy.
Dual rates and expo explained for RC transmitters: how D/R scales maximum throw, how expo softens center response, sign conventions, and starting points.
What RC plane failsafe does when the radio link drops, which modes to choose, how to set throttle and surfaces, and a ground test for every setup.
How to bind an RC plane transmitter and receiver: select the right model memory, bind in the correct order, confirm the link, and check failsafe.
Build a DIY drone transmitter and receiver with Arduino and nRF24L01 modules: parts, wiring, the link, failsafe code, and testing with props off.
How to charge and store LiPo batteries for RC planes safely, covering balance charging, storage voltage, discharge limits, damage signs, and disposal.
How to set up RC plane control rods and pushrods: pick rod types and wire sizes, set clevises and horns, center servos, and remove slop and binding.
How to choose an RC plane motor and propeller: start from weight and purpose, read motor numbers and Kv, size props by diameter and pitch, and match the ESC.
How to choose and install RC plane retracts: compare electric, pneumatic, and mechanical types, plan mounts and power, and troubleshoot gear that won't cycle.
What are channels in RC? A channel is one independently controlled function, like throttle or ailerons. Learn the four primary channels and how many you need.
Related topics