RC Jets

How to build a jet engine for RC plane?

Building a turbine from scratch takes serious machining and balancing skill. Here's why most flyers buy one, what DIY involves, and what to avoid.

On this page
  1. Why most flyers buy a turbine
  2. What a model turbine needs
  3. Skills, tools and time
  4. Options short of scratch-building
  5. What DIY projects show
  6. If you still want to try
  7. Bottom line

Most people buy a commercial turbine rather than building one. Building a model turbine from scratch is possible for skilled machinists, but it calls for precision machining, high-temperature alloys, dynamic balancing and a long test program. At rotor speeds above 100,000 RPM, a failure can be violent. This article explains what’s involved and the safer alternatives. It isn’t a build guide.

Why most flyers buy a turbine

A commercial turbine comes balanced, tested and supported by spares and manuals. A home-built engine has to be right at every step: rotor balance, bearing fit, combustor, fuel control and the start system. Hours at the lathe don’t guarantee a flyable result.

DIY doesn’t automatically mean cheap. Parts and tools can exceed the price of a commercial engine.

What a model turbine needs

A model turbine is a set of parts that have to work together at high speed and high temperature:

  • A centrifugal compressor that moves and compresses the air.
  • A diffuser that slows the air and recovers pressure before the combustor.
  • An annular combustor that mixes fuel and air and burns them steadily.
  • Nozzle guide vanes that direct hot gas onto the turbine.
  • A turbine wheel, usually a cast nickel superalloy part. Hand-made wheels are a major failure risk.
  • A shaft on two small ceramic-hybrid bearings, lubricated by oil in the fuel.
  • A control system for fuel metering, ignition, starting and temperature sensing.

The rotor has to be dynamically balanced because it spins at more than 100,000 RPM. Even a small imbalance can destroy an engine. How an RC jet turbine works explains how these parts fit together.

Skills, tools and time

A home build usually needs:

  • A metal lathe and milling capability, plus accurate measuring tools
  • Sheet metal and welding skills, such as TIG or spot welding
  • Dynamic balancing, or access to a shop that can balance a rotor to a high standard
  • A test stand with thrust and temperature measurement
  • Hundreds of hours of design, build and test time

Projects that reach a test stand often take many months, and first test runs frequently don’t go to plan.

Options short of scratch-building

  • Commercial turbine. The usual choice. You get a balanced, tested engine with documentation and spare parts.
  • Modular kits. A core engine with optional accessories, such as a custom ECU or fuel tank. Kits still need mechanical setup and fuel-system work, which can take many hours.
  • Non-flying demonstration turbines. Electric-driven or sectioned models made for learning how turbines work. They don’t fly.
  • Pulse jets. A different design, not a turbine. They’re loud, vibrate heavily and are restricted or banned at many flying sites. See how loud RC jet engines are.

For a first flying jet, RC turbine jets for beginners covers what to buy instead.

What DIY projects show

Published DIY projects are useful reading, with caveats:

  • A mechanical engineering student’s Flite Test build log describes a turbojet machined over roughly a year. The first test run did not self-sustain. The builder reported the engine came out of the test in good condition and that the team learned a lot. The project shows how much work and iteration a home build takes.
  • Turbocharger-based “jet engines” are test-stand projects. They’re generally too heavy to fly as RC models.
  • 3D-printed plastic turbines can’t survive real combustion temperatures. Printed models are for display.

If you still want to try

  • Learn from published references. Thomas Kamps’ Model Jet Engines and Kurt Schreckling’s Gas Turbine Engines for Model Aircraft are often cited as starting points.
  • Work with experienced people. A university lab, a machine shop with balancing experience, or an established club builder can help more than forum threads.
  • Test on a stand, outdoors, behind a shield. Keep a CO2 extinguisher ready. Never stand in line with the turbine wheel’s plane of rotation.
  • Budget more than you think. Tools, materials and test-stand equipment can cost more than a commercial engine.

Bottom line

Building a model jet engine is a serious engineering project. If your goal is to fly a jet, a commercial turbine or a modular kit is usually faster and safer. If your goal is to learn how turbines work, start with the reference books, a demonstration model and a club mentor. RC jet engines: turbines, EDFs and how to get started compares the options.

Before you run any turbine, read how to start an RC jet turbine safely.

The complete guide to rc jets

RC Jet Engines: Turbines, EDFs and How to Get Started
Read the guide

Keep exploring

Guides from other topics

All topics →