RC Jets

RC Jet Engines: Turbines, EDFs and How to Get Started

Compare RC jet power options: kerosene turbines, electric ducted fans (EDFs) and pulse jets, with costs, noise, maintenance and how to choose one.

On this page
  1. What “RC jet” covers
  2. The main options at a glance
  3. How a turbine works
  4. Electric ducted fans: the easiest way in
  5. Kerosene turbines
  6. Pulse jets and other options
  7. Costs and ownership
  8. Noise, safety and rules
  9. Which option should you choose?
  10. Questions people ask

What “RC jet” covers

In the hobby, “RC jet” usually means a model that looks and flies like a jet. There are two main ways to get that thrust: an electric ducted fan (EDF), or a miniature kerosene gas turbine. Pulse jets and rocket motors come up in the same conversations, so they’re covered below too.

An EDF isn’t a jet engine in the strict sense. It’s an electric motor spinning a fan inside a duct. A turbine is a small gas turbine that burns kerosene-type fuel. The two feel, sound, cost and maintain very differently, so it helps to know which one you’re looking at.

The main options at a glance

Option Power source Typical cost Noise Upkeep Best suited to
Electric ducted fan (EDF) Brushless motor and LiPo battery Ready-to-fly jets mostly about $200 to $1,000 Quieter, roughly 80 to 95 dB(A) near the model Low: batteries and fan care Learning jet handling, park and club fields
Kerosene turbine Jet A-1 or kerosene with turbine oil Entry sport jet, complete, about $5,000 to $10,000 Loud, roughly 110 to 125 dB(A) at close range High: regular service and logs Experienced pilots, sport and scale jets
Pulse jet Gasoline or propane Kits often in the low hundreds of dollars Louder than turbines Moderate: oil and fuel residue Demonstrations and experimental flying
Rocket motor Single-use or reloadable model rocket motor Per-flight motor cost Loud at launch Low, but motors are consumed Rocket gliders and boosted speed builds

How a turbine works

A model turbine follows the same basic cycle as a full-size jet engine: air is drawn in, compressed, mixed with fuel and burned, and the hot gas expands through a turbine and out the nozzle. Most model turbines are turbojets, with one centrifugal compressor, an annular combustor and one axial turbine wheel on a single shaft. The turbine wheel drives the compressor, and the gas leaving the nozzle provides the thrust. A step-by-step walk-through is in how an RC jet turbine works.

Turbine thrust is rated in kilograms-force (kgf) or newtons (N). Small sport-jet turbines sit around 8 to 14 kgf, or roughly 80 to 140 N. More on sizes is in how much thrust an RC jet engine has.

Electric ducted fans: the easiest way in

EDF jets are the usual first step. They’re cheaper, quieter and simpler to start than a turbine. Battery flight time is typically about 3 to 6 minutes per pack, depending on battery size and throttle use. Fan sizes are usually grouped like this:

  • 50 to 70 mm: park-sized jets, often for smaller spaces
  • 80 to 90 mm: sport jets on 6S to 8S batteries
  • 120 mm and up: large jets on 10S to 14S batteries

EDF thrust varies a lot with the fan, battery and installation. Spec-sheet numbers are often optimistic, so compare them carefully. A common path is prop plane, then EDF jet, then turbine. RC turbine jets for beginners covers that next step.

Kerosene turbines

Kerosene turbines are real miniature gas turbines. They run on Jet A-1 or kerosene with a premixed turbine oil, and they need an electronic control unit (ECU) to start, run and shut down. A complete system usually includes the engine, ECU, fuel pump, valves, a hopper or air-trap tank, a filter, and a ground support unit or app for monitoring.

Turbines reward careful operation. Makers typically call for service about every 25 to 50 run hours, and every start should be made with a helper and a fire extinguisher ready. The details are in how to start an RC jet turbine safely and RC jet engine maintenance.

Fuel and oil are covered in what fuel RC jet engines use. How long a tank lasts depends on tank size and throttle, as explained in RC jet flight time.

Pulse jets and other options

Pulse jets are a different design. They run in intermittent bursts on gasoline or propane and have few moving parts. They’re much louder than turbines, and many flying sites restrict or ban them.

Many EDF jets also have LED “afterburner” lighting kits. Those are a visual effect, not a flame. See RC jets with afterburners for the difference.

Nitro and glow engines are often mentioned alongside jets, but they power propeller planes. They aren’t turbines and can’t be swapped into one.

Rocket motors are a niche third option. They’re single-use or reloadable solid motors, mostly used in rocket gliders. See RC rocket planes for how they work and the safety rules that apply.

Costs and ownership

Purchase price is only part of the cost. Turbines add ongoing costs for Jet A-1 or kerosene, turbine oil, service, repairs, hearing protection, a fire extinguisher and transport. Large composite jets add retracts, brakes, scale details and electronics on top. A complete entry sport turbine jet usually runs around $5,000 to $10,000. The beginner guide breaks down a first-jet budget, and what is the most expensive RC jet? covers the top end.

Noise, safety and rules

Turbines are loud. How loud RC jet engines are covers typical levels and hearing protection. A CO2 fire extinguisher is standard equipment at any turbine start.

In the US, AMA sites require a turbine waiver for turbine models; check the current AMA documents for the process. Other countries have their own rules, and many local ordinances restrict jet flying. Check your club and national authority before you buy.

Which option should you choose?

  • New to jets: start with an EDF jet, or fly with an experienced jet pilot.
  • Want authentic jet sound, speed and thrust, and you have experience: a kerosene turbine sport jet is the usual next step.
  • Want to learn how engines work: a non-flying demo model or a club talk may suit you better than a flying turbine.
  • Tempted to build a turbine: read how to build a jet engine for an RC plane first.

Questions people ask

How does an RC jet work?

A turbine-powered RC jet compresses air, burns fuel in it and pushes the hot gas out the back. The turbine wheel drives the compressor on the same shaft. An EDF jet works differently: an electric motor spins a fan inside a duct. The turbine walk-through covers each step.

Why are turbojets not used anymore?

Turbojets have largely been replaced on airliners by turbofans, which move more air at lower speed and are generally more fuel-efficient. Turbojets still power some military aircraft and missiles. Model turbines are turbojets in design, because a single-stage centrifugal engine is simple and works well at small size.

How much does an airplane jet engine cost?

Full-size airliner engines cost millions of dollars each. Entry model turbines cost roughly $1,000 to $2,500 for the engine alone, and a complete turbine jet costs more once you add the rest of the system.

What is the most expensive RC jet?

There’s no verified answer. The highest figures quoted are for one-off custom or large scale builds, and they’re hard to confirm. The most expensive RC jet article explains what can and can’t be checked.

Keep exploring

Guides from other topics

All topics →