Learn to Fly

How to Fly an RC Plane: A Beginner's Tutorial

Learn to fly an RC plane step by step, from choosing a stable beginner trainer and practicing on a simulator to pre-flight checks, first flights and landing.

On this page
  1. What you need to get started
  2. Choose a beginner-friendly trainer
  3. Learn the controls
  4. Practice on a flight simulator first
  5. Get help from an instructor or club
  6. Run your pre-flight checks
  7. Your first flights: takeoff, climb, and turns
  8. Learn to land
  9. Take care of your LiPo batteries
  10. Safety and the rules
  11. Common beginner mistakes
  12. Next steps

Flying an RC plane is one of the most rewarding ways into model aviation, but the first few flights can be humbling. The path that works for most beginners is simple: pick a forgiving trainer, learn the controls, practice on a simulator, fly with an experienced pilot, and only then take off and land on your own in calm conditions.

If you remember one thing, make it this. A stable, ready-to-fly foam trainer, some simulator time, and an instructor on a buddy box will get you flying far more safely than trying to solo a small or fast plane.

What you need to get started

A basic beginner setup includes:

  • A ready-to-fly (RTF) trainer. RTF kits usually include the plane, a transmitter, a battery, and a charger.
  • A flight simulator, if you want to practice first. Our comparison of two popular RC flight simulators can help you choose one.
  • Spare batteries and a LiPo-safe charger. Most beginner trainers use lithium polymer (LiPo) packs.
  • An open flying field. Look for a wide area with no people, power lines, trees, or roads nearby.

Choose a beginner-friendly trainer

A good first plane is a trainer, which is designed to be slow, stable, and forgiving. Look for:

  • High wings, which place the weight below the wing and make the plane more stable.
  • Dihedral, the slight upward angle of the wings, which helps the plane level itself when you let go of the sticks.
  • Foam construction, which survives crashes and is inexpensive to repair with foam-safe glue.
  • A wingspan of about 1 to 1.5 m (40 to 60 inches). Very small planes are harder to fly in even a light breeze.
  • Gyro stabilization, such as Spektrum SAFE, FMS Reflex, or Volantex Xpilot. It helps keep the plane level and often includes a panic-recovery button.

Avoid warbirds, electric ducted-fan (EDF) jets, and fast low-wing planes as a first model. They are unforgiving, and starting with one often ends in a crash. For more on what makes a plane beginner-friendly, see what a beginner RC plane is.

Building your own plane from a kit is rewarding and teaches you repairs, but most first-timers do better starting with a ready-to-fly trainer. Building a plane does not change the rules. Weight, registration, and airspace limits still apply however the plane was made. Check current guidance from your country’s aviation authority. A homemade jet is not a sensible first build, because jets are fast and need experience.

Learn the controls

Most RC airplanes respond to four controls:

  • Throttle sets power. It is the main control for how fast the plane climbs or descends.
  • Elevator pitches the nose up or down. It mainly sets the plane’s airspeed and attitude.
  • Ailerons roll the plane left or right.
  • Rudder yaws the nose left or right. Three-channel trainers turn with rudder and dihedral, while four-channel planes usually turn with ailerons.

Most North American pilots use Mode 2. In Mode 2, the left stick controls throttle (up and down) and rudder (left and right), and the right stick controls elevator (up and down) and ailerons (left and right). Mode 1 swaps the throttle and elevator, so check which mode your radio uses before you fly.

A common mistake is thinking the elevator makes the plane climb. Throttle is the main control for climb and descent. Before your first flight, move each control with the plane on the ground and confirm that each surface moves the way you expect.

Practice on a flight simulator first

Many instructors suggest roughly 10 to 20 hours on a simulator before your first real flight, though the right number varies. A simulator lets you practice takeoffs, rectangular circuits, landings, and flying toward yourself without risking a model. If the simulator supports it, use your own transmitter. Stick feel transfers far better than a gamepad.

Simulators cannot reproduce real wind, depth perception, or the nerves of flying a plane you can crash. Treat them as preparation, not a replacement for field time. Our RC flight simulators compared article looks at two popular options.

Get help from an instructor or club

The fastest route is an experienced pilot. Many clubs, including AMA-affiliated clubs, offer free or low-cost introductory flights. An instructor can use a buddy box, a cable or wireless link between the two transmitters, so they can take over the controls instantly if you get into trouble.

Club fields are also a better place to learn than an open park, because they are laid out for flying and their members know the local rules.

Run your pre-flight checks

Before every flight, go through a short checklist:

  • Charge the flight battery and check it for swelling or damage.
  • Confirm the center of gravity (CG) matches your manual. On many trainers it sits roughly 25 to 33 percent of the wing’s chord (the front-to-back width) back from the leading edge.
  • Check that each control surface moves freely in the correct direction.
  • Center the trims, and set the failsafe to throttle cut.
  • Do a range check. With the transmitter in low-power mode, walk away from the plane and confirm full control at about 30 paces. The exact distance varies by brand, so check your manual.
  • Plug in the flight battery last, and unplug it first.

Your first flights: takeoff, climb, and turns

Take off into the wind. A headwind shortens your roll and reduces ground speed, which gives you more control. For the details, see how to take off an RC plane.

Once airborne, climb to a comfortable height, roughly 100 to 200 feet. Pilots often say you should stay “two mistakes high,” meaning you have enough height to recover from an error. Then trim the plane so it flies straight and level with your hands off the sticks.

To turn, bank with the ailerons, add a little up-elevator to hold altitude, and then level the wings. Fly large ovals or rectangles in front of you. Keep the plane out of the sun and never let it fly behind you, where you can’t see it clearly.

When the plane flies toward you, its left and right feel reversed. This is one of the hardest things for new pilots. Practice it in a simulator, and fly with a buddy box until it feels natural.

Learn to land

Landing is usually the hardest skill to master. Land into the wind, fly a steady rectangular pattern, descend on a shallow glide with some power still on, and flare just before the wheels touch. If the approach looks unstable, go around and try again. A go-around is a normal part of flying. Our step-by-step landing guide walks through each stage.

Take care of your LiPo batteries

Most beginner trainers use LiPo packs, which are sensitive to over-discharge and overcharging.

  • A fully charged LiPo cell reads about 4.2 volts, with a nominal voltage of 3.7 volts.
  • Land before a cell drops to about 3.5 volts at rest. Never let a cell fall below about 3.0 volts.
  • Store packs at around 3.8 volts per cell.
  • Charge packs with a LiPo-safe charger, and never leave them charging unattended.

Flight timers on trainers commonly show 5 to 8 minutes, but the real time depends on the battery and how hard you fly. Watch the plane and the battery, not just the clock.

Safety and the rules

  • Keep your hands and fingers clear of the propeller once the battery is connected. Props on brushless motors are sharp and powerful.
  • Keep the plane in your line of sight, away from people, and give way to manned aircraft.
  • In the United States, you do not need a pilot license to fly for fun. You do need to complete the free TRUST safety test, register aircraft that weigh more than 250 grams, and stay below 400 feet. See the license and registration guide for the details.
  • Rules differ in other countries. Check your national aviation authority before you fly.

Common beginner mistakes

  • Overcontrolling. Trainers need small, smooth stick inputs.
  • Flying in too much wind. For first flights, aim for calm conditions, with wind under about 5 to 8 miles per hour.
  • Starting with the wrong plane. Fast, small, or low-wing models are harder to recover.
  • Flying too far or too high too soon. Stay within range and at a height where you can see the plane clearly.
  • Ignoring the battery. Land with a reserve in the pack, not at the bottom of the timer.

Next steps

Once you are comfortable with the basics, read how difficult it is to fly an RC plane to set realistic expectations, or see what a beginner RC plane is to narrow down your first purchase. Practice in a simulator, get an instructor’s help, and fly in calm weather. That combination gives most beginners a much smoother start.

Keep exploring

Guides from other topics

All topics →