Flying Disciplines

RC Slope Soaring: Flying Gliders on a Hillside

RC slope soaring uses wind blowing up a hillside to keep gliders aloft. Learn how ridge lift works, which wind suits which planes, and how to fly safely.

On this page
  1. How slope lift works
  2. Picking a slope
  3. Wind you can use
  4. Planes for slope flying
  5. Launching and landing
  6. Slope racing
  7. Safety and permission

How slope lift works

When wind hits the face of a hill, it’s pushed upward. This is ridge lift. It keeps a glider up for as long as the wind keeps blowing onto the slope.

The lift is strongest in front of the ridge edge, not directly above the pilot. Fly in front of the edge and slightly above it, in the lift band.

Behind the ridge, the air turns over into rotor turbulence, with sink and bumps. Landing on top, just behind the edge, is common, but expect sink and turbulence on the way in.

Slope lift is different from thermal lift. It depends on wind direction and the shape of the hill, while thermal lift depends on sun-heated ground. For the second, see RC thermal soaring.

Picking a slope

A good slope is smooth, steep and unobstructed, with an open area for landing. Wind should hit the face nearly head-on, ideally within about 30 to 45 degrees of straight on. Wind direction and the smoothness of the face matter most. Not every hill works.

Before you go, check the forecast for that slope, bring a wind meter, and check land permissions and local rules.

Wind you can use

Usable wind is usually about 10 to 25 mph. Light floaters can work in 5 to 10 mph, while ballasted gliders can handle 30 mph or more. More wind is not always better. Stronger wind brings more turbulence, which makes the flying harder.

Planes for slope flying

Slope flying uses a range of planes:

  • EPP foam wings, often Zagi-style, which are cheap and common.
  • Foam sport planes.
  • Scale slope gliders.
  • Larger 2 to 3 m molded models.

In strong wind, pilots often add ballast to raise the wing loading and speed, which helps the glider penetrate the wind.

Launching and landing

Launch by a firm toss forward and slightly down, into the wind. Land into the wind, either on top just behind the edge or at the bottom of the slope.

Watch your footing near cliff edges, especially when you’re looking up at your model.

Slope racing

F3F is the FAI class for slope racing. Pilots race back and forth along a fixed course on the slope. It’s a different discipline from relaxed slope flying.

Safety and permission

  • Keep clear of hikers and other people on the slope.
  • Check land permissions and local rules before you go.
  • Watch your footing near cliff edges, and keep an eye on the ground as well as the glider.

The complete guide to flying disciplines

RC Aerobatics and 3D Flying: Styles, Disciplines and Planes
Read the guide

Keep exploring

Guides from other topics

All topics →