What a thermal is
A thermal is a column or bubble of warm air that rises from ground heated unevenly by the sun. As it climbs, cooler air sinks around it. Thermals drift with the wind and lean downwind, so they’re rarely in one place for long.
Sink surrounds a thermal. Fly straight and fast through the sink rather than circling in it.
When and where thermals form
Thermals are usually strongest from late morning to mid-afternoon in sunshine, though the timing varies with the day. They can form on cool days too.
Good sources are dark fields, parking lots and plowed ground, which heat up quickly. Tree lines, buildings and field edges can trigger thermals as well. Since thermals drift downwind, search downwind of the likely sources.
Reading the ground and air signs
Ground signs are the first clue. Watch how grass, bushes, trees and dust move. Rising air draws in air from around it, so changes in that movement can show where a thermal is forming.
Air signs are visible from the field:
- Bugs, seeds or bits of trash rising
- Birds circling or working a patch of air
- Puffy cumulus clouds, which often mark where thermals form
- Dust devils
- Wind lulls or shifts, and changes in temperature
Use several signs together rather than relying on one.
Watching your model
Your model often shows lift before you feel it. A wing lifting, the tail rising, the model speeding up or vibrating: each is a signal. The better you know how your glider behaves in lift, sink and neutral air, the easier those signals are to read.
Smooth flying helps. Unplanned stick movements can mask the glider’s response to lift, so a steady hand makes the signals easier to read.
Some pilots let the model fly on its own for a moment while they watch for these signs. When the model shows lift, tighten the circle near the ground. When the lift is lost, let the glider fly on to find the next bump.
Working a thermal
When one wing lifts, turn toward it. Circle with a bank of roughly 20 to 30 degrees, and shift the circle toward the strongest lift. A steeper bank isn’t always better. It can make the circle harder to keep centered.
Keep the glider in sight. Losing sight is easy at height.
Sink and staying in lift
Weak lift is often worth staying in. Keep the glider in it while you look for a stronger core, rather than flying off to air that only looks better.
Fly straight and fast through sink, and don’t keep circling in it.
Launch options
Thermal gliders can be launched several ways:
- Hi-start: a long rubber cord with a line, stretched out and released to launch the glider.
- Winch: a winch pulls the glider up on a line. Winch launch is common in some competition formats.
- Electric motor: a powered launch, as used in F5J electric duration gliding.
- Hand launch: for hand-launched duration gliders.
- Aerotow: a tug plane pulls the glider into the air. See RC glider towing.
Choosing a glider
Beginners often start with a 2 m polyhedral glider with rudder, elevator and spoiler controls. Advanced pilots often fly 3 to 4 m molded gliders with a full set of control surfaces, including ailerons and flaps.
For how timed thermal competition works, see F3J glider competition.
Telemetry and variometers
An audio variometer beeps when the glider climbs, which makes lift easier to detect. Telemetry systems can send a variometer reading from the model to the transmitter, so you can hear the lift as it happens.
Descending and airspace
When you’re high in strong lift and want to come down, use spoilers, or crow or butterfly flaps, to lose height.
In the US, recreational flying is generally limited to 400 ft above ground level in uncontrolled (Class G) airspace. Flying in controlled airspace needs authorization. Check current FAA rules before you fly.
Safety: keep it in sight
Losing sight of a glider is easy at height. Descend before it becomes a dot in the sky.