Flying Disciplines

F3A Pattern Aerobatics: Planes, Rules and Getting Started

F3A pattern aerobatics explained: how precision flights are judged, the plane limits, where the Kaos 60 fits, and how to start in the Sportsman class.

On this page
  1. What F3A pattern flying is
  2. How a flight is judged
  3. What an F3A plane looks like
  4. Where the Kaos 60 fits
  5. Getting started in Sportsman
  6. Pattern is not 3D
  7. Safety at the flight line

What F3A pattern flying is

F3A is the FAI class for radio-controlled precision aerobatics, usually called pattern flying. The pilot flies a set sequence of maneuvers inside an imaginary box in front of them, and judges score each maneuver as it’s flown.

Pattern rewards constant speed, straight lines, accurate radius, centering and correct roll rates. A plane that tracks straight keeps the pilot’s inputs small and the lines clean, so pattern planes are built with that in mind.

Pattern is a different skill from 3D flying. A scored routine has no hovers or harriers. For the 3D side of the hobby, see RC aerobatics and 3D flying.

How a flight is judged

Judges score each maneuver from 0 to 10 in half points. That score is multiplied by a difficulty factor, called the K-factor, so harder maneuvers count for more.

Schedules come in preliminary and final rounds, and the top levels add unknown sequences. Schedules change over time, so use the current list when you practice.

What an F3A plane looks like

The FAI Sporting Code sets the limits that shape the plane:

  • Size: about 2 m of span and about 2 m of length.
  • Weight: about 5 kg. Sources quote this figure differently, so check the current Sporting Code before you build.
  • Power: Electric power is capped at 42 V, which means a 10-cell lithium pack at most. Noise limits also apply.
  • Stabilization: Gyros and automatic stabilization are prohibited.

Modern top-level planes are mostly composite and electric, and many use contra-rotating propellers to cancel torque. Glow and gas engines were common before electric power, and some pilots still fly them.

Where the Kaos 60 fits

The Kaos 60 is a classic .60-size design from the 1970s, by Joe Bridi. It has a symmetrical airfoil and a span of roughly 60 inches. Sources differ on the exact figures; one kit thread gives about 62 inches and about 6 lb, with engines in the .45 to .91 range.

The Kaos 60 is still sold as a kit and flown as a sport aerobatic plane. It is not a current FAI-legal competition design, but it’s a useful practice airframe for learning the basics of precision flying.

Getting started in Sportsman

You don’t need a top-level 2 m composite plane to start. Many pilots begin in the Sportsman class with sport-level planes, including Kaos-style designs and 1.5 to 1.8 m electric aerobats.

A practical path:

  1. Fly the plane smoothly before you add a sequence. Constant speed, straight lines and clean rolls are the skills that count.
  2. Keep the throws low. Precision throws are typically around 10 to 20 degrees, with expo for center feel. Snaps usually go on a separate rate.
  3. Practice the maneuvers on a simulator, then with an instructor.
  4. Pick a plane you can fly often. Practice time matters more than the airframe.

Pattern is hard even on stable planes. What makes an RC plane hard to fly explains why. For a lighter precision class flown indoors, see F3P indoor aerobatics.

Pattern is not 3D

Pattern planes don’t hover or harrier, and those maneuvers aren’t part of a scored routine. Bigger, faster maneuvers aren’t better either. The routine is about precision at the right speed for the plane’s size.

Safety at the flight line

  • Keep all maneuvers on the far side of the flight line, never over the pits or spectators.
  • Connect and arm the battery only at the flight line. A 10-cell pack carries high voltage.
  • Run a range check and a control-direction check before every flight, and set the failsafe to throttle off.

The complete guide to flying disciplines

RC Aerobatics and 3D Flying: Styles, Disciplines and Planes
Read the guide

Keep exploring

Guides from other topics

All topics →