How a pylon race works
Pylon racing sends fast planes around a marked course, lap after lap. Most races run 10 laps, with heats of about three or four planes. The fastest legal time wins the heat.
The international F3D class flies a triangular course with a lap of about 400 m. Courses at US races vary by class and venue.
Cuts and penalties
A cut is flying inside a turn pylon instead of passing outside it. Pylon judges watch each turn and flag or buzz a cut when they see one.
Penalties vary by event. A cut can cost an extra lap, a time penalty, or zero points for that heat.
Cutting inside a pylon doesn’t help. Smooth, tight turns win more than top speed does.
Roles: pilot, caller and judges
Each pilot has a caller, who calls turns and traffic so the pilot can focus on flying the plane. Starts can be ground starts or hand launches, depending on the class.
Pylon judges follow the event’s protection rules, such as shields and positions, so they stay safe while they judge.
Classes and planes
Pylon planes are small, low-wing racers with high wing loading. Many are modeled on full-size racers such as the Cassutt, the Shoestring and the Nemesis.
Common US classes include:
- Quickie 500 (Q500): a common entry class.
- Q40 and Club 40.
- Formula 1, the faster end of the scale.
- Electric classes, such as EF1.
Class lists vary, so check the current rules for your region.
Internationally, FAI F3D is a glow class with 6.5 cc (.40) racers. FAI F5D is its electric counterpart on a similar course.
Speeds
Approximate top speeds are around 120 to 150 mph for Quickie 500 and close to 200 mph for Formula 1. Actual speeds depend on power and setup, so treat these as rough figures.
Governing bodies and sanctioned events
The National Miniature Pylon Racing Association (NMPRA) is the special interest group for pylon racing within the Academy of Model Aeronautics (AMA). It works to promote, organize and standardize the sport. Pylon racing also appears at the AMA’s National Aeromodeling Championships, and the FAI sets the international classes.
AMA membership is generally required at sanctioned US contests.
Getting started
Start in an entry class such as Quickie 500 or a club electric class, rather than a top-speed class. Learning the course, the calls and the turns is easier at lower speeds.
Find a club or a local race, and watch a few heats before you bring a plane. You’ll need a caller, so recruit a friend or a club member to work with you.
Safety around the course
- Keep the course well away from spectators.
- Judges follow the event’s protection rules, including shields and positions. Follow their instructions.
- Set the failsafe to throttle off.
If you’d rather fly combat than timed racing, see RC plane dogfighting. For the other aerobatic and 3D styles, see RC aerobatics and 3D flying.