Learn to Fly

What is a beginner RC plane?

A beginner RC plane is a stable, forgiving trainer, usually a high-wing foam electric model about 1 to 1.5 m across. Here's what to look for and what to avoid.

On this page
  1. Why trainers are built the way they are
  2. Stabilization and beginner modes
  3. Choosing the right size
  4. Ready-to-fly, BNF, PNP, and ARF
  5. Typical price
  6. Example beginner planes
  7. Planes to skip as a first model
  8. Power and batteries
  9. Safety
  10. Next steps

A beginner RC plane is a trainer: a slow, stable, forgiving model that tends to recover on its own when you let go of the sticks. Most trainers have high wings, foam construction, and electric motors, and they are usually about 1 to 1.5 m across. Their design is meant to absorb the mistakes every new pilot makes.

Why trainers are built the way they are

  • High wings place the weight below the wing, which makes the plane more stable.
  • Dihedral, the shallow upward angle of the wings, helps the plane level itself.
  • Low wing loading means the plane flies slowly and lands gently.
  • Foam construction (EPO or EPP) survives crashes and is easy to repair.
  • Pusher propellers, which sit behind the wing on some models, can survive nose-first crashes better than a front-mounted prop.

Stabilization and beginner modes

Many trainers include gyro stabilization. Common systems include Spektrum SAFE, FMS Reflex, and Volantex Xpilot, though product names and versions change. Stabilized planes often include:

  • A beginner mode, which limits how far the plane can bank and pitch.
  • Panic recovery, which levels the plane when you let go of the sticks or press a button.

Some systems add intermediate and expert modes for later. Stabilization helps a lot, but it doesn’t replace learning orientation and landing.

Choosing the right size

The ideal first trainer has a wingspan of about 1 to 1.5 m (40 to 60 inches). Planes of this size are steadier and easier to see. Micro planes, often under about 700 mm, suit calm days only and get pushed around easily. Larger trainers need more open space but usually handle light wind better.

Ready-to-fly, BNF, PNP, and ARF

  • RTF (ready-to-fly) kits include the plane, a radio, a battery, and a charger. This is usually the best choice for a first plane.
  • BNF (bind-and-fly) kits include the plane, but you need a compatible transmitter.
  • PNP and PNF kits leave out some of the radio gear, so check the box contents before you buy.
  • ARF (almost-ready-to-fly) kits need assembly before you can fly.

Typical price

Most beginner RTF trainers cost roughly $100 to $250. Larger or more advanced models cost more. Budget toy planes can cost less, but they often lack range and wind tolerance.

Example beginner planes

Popular beginner trainers include the E-flite Apprentice STS 1.5m, the HobbyZone AeroScout S 2, the HobbyZone Sport Cub S 2 (a micro-size trainer), and models from the FMS and Volantex Ranger series. Lineups change, so check current versions before you buy.

Planes to skip as a first model

  • Warbirds and fast low-wing planes are unforgiving.
  • Jets and EDF jets are fast and have high stall speeds.
  • Ultra-cheap toy planes are often too weak to fly in any wind.
  • Gas-powered models need more engine maintenance and are usually better left until you are comfortable with electric trainers.

Power and batteries

Most trainers around 1 m use brushless electric motors and 3S LiPo packs, which have three cells. Micro planes often use a single-cell (1S) pack. Check the manual for the correct battery before you buy one.

Safety

Propellers on brushless motors are sharp and powerful. Keep your hands and fingers clear of the prop once the battery is connected.

Next steps

To learn how to fly your new plane, read how to fly an RC plane. For what to expect while you learn, see how difficult it is to fly an RC plane.

The complete guide to learn to fly

How to Fly an RC Plane: A Beginner's Tutorial
Read the guide

Keep exploring

Guides from other topics

All topics →