The short answer
Unusual RC aircraft are fun, but most are not first planes. Many “TIE fighters” are quadcopters in a shell. RC Ospreys are tiltrotors that need a flight controller to hover and transition. Blended wings and flying wings are sensitive to balance. Most odd shapes are intermediate or advanced projects, so start with a conventional trainer and build up.
TIE fighters
Most commercial RC TIE fighters are quadcopters with a TIE-style shell. Toys from several brands have followed this design since about 2016. They fly by thrust from four rotors, not by wing lift, so they hover and move like a drone rather than a plane.
A TIE fighter toy is usually small and light. One reviewer of a 4-channel 2.4 GHz model reported about 5 to 8 minutes of flight from a 3.7 V, 350 mAh LiPo battery, with 360-degree flips and a headless mode. These toys are good fun for light use, but they are not a model of how a TIE fighter flies.
Hobbyist TIE fighters are often built from foam board. Some builders hide the propellers inside the “wings,” and some use quadcopter setups. These builds are popular online, and plans are shared freely.
RC Ospreys and tiltrotors
The V-22 Osprey is a tiltrotor. It takes off and lands like a helicopter, then tilts its rotors forward to fly like an airplane. An RC version needs a flight controller to manage hover, transition and forward flight.
The transition is the riskiest part of the flight. Set up separate modes for hover, transition and airplane flight, and test them carefully. Stabilization helps keep the model upright in hover, but it does not replace a proper setup.
One owner of an RC Osprey reported that stabilization stopped the model from tipping but did not hold altitude or position. In a steady wind of about 12 knots, holding position in hover mode used most of the available thrust. Expect a tiltrotor to be a challenge in windy weather.
Several ready-to-fly and bind-and-fly Osprey models exist, including a foam E-flite V-22 VTOL model. Check current availability and specifications before you buy. These models are usually better suited to experienced pilots who already know how to fly both airplanes and multirotors.
Blended wings and flying wings
A blended wing body (BWB) merges the fuselage into the wing, so the whole aircraft lifts. The full-scale reference is the Boeing X-48, a subscale remotely piloted test aircraft that first flew in 2007.
Hobby flying wings and blended wings use elevons, which combine aileron and elevator functions on each wing panel. They often use reflex airfoils, which curve the trailing edge up slightly to help them stay stable.
Center of gravity is critical on a flying wing. A few millimeters too far back can make the plane pitch-unstable, and too far forward can leave it nose-heavy with too little elevon authority. Balance the model exactly as the plans or manual describe, and test the glide before adding power.
Other unusual types
Other unusual designs include:
- Autogyros, which use an unpowered rotor for lift and a propeller for forward thrust.
- Ornithopters, which fly by flapping wings.
- Flying saucers or discs, which often rely on a motor and a careful balance.
- Canards, with a small wing or surface ahead of the main wing.
- Joined-wing and tailsitter designs. A tailsitter takes off vertically on its tail and pitches over to fly like a plane.
Many oddballs are built from foam board or 3D-printed parts. Most use standard motors, speed controllers and receivers, so you do not need exotic gear.
Skill and safety
VTOL and quad-style models have several exposed propellers. Arm them only when the area is clear, and keep hands and bystanders away from the props at all times.
Test any new flight-controller setup in hover, with a failsafe configured, before you try a transition. Start in a large, open field, away from people and property.
Where to start
If you are new to RC, start with a conventional trainer. Our guide to the best first RC plane covers the options. For a broader overview of categories, see the best RC planes for every skill level and budget. If you are drawn to fast or unusual flight, high-speed RC planes explains what those models demand.