Short answer: most buyers should choose flybarless
For most new hobby pilots, a flybarless (FBL) helicopter is the better choice. Most current hobby-grade collective-pitch helicopters use it. Flybar heads still exist and have their place, mainly in scale and vintage flying, but they need more mechanical setup and have more wear points. For the wider buying picture, see professional RC helicopters.
What a flybar does
A flybar is a weighted bar across the rotor head, with paddles at each end. The bar and paddles resist sudden movement and damp control inputs, so the head doesn’t overreact. Linkages called mixing arms pass those movements to the blades, a setup known as Bell-Hiller mixing.
Flybar heads need careful mechanical setup. The paddles must be level, the mixing arms and linkages must be set correctly, and there are more moving parts that can wear.
What flybarless does
A flybarless head has no bar. A 3-axis gyro unit electronically stabilizes the cyclic (tilt) and tail controls in place of the flybar. The unit keeps reading the helicopter’s motion and correcting the servos as it flies.
Because the stabilization is electronic, you tune it in software: gains, agility and cyclic feel. Flybarless units can be standalone or built into a receiver. They range from roughly $50 for a receiver-integrated unit to about $500 for a premium one.
Rescue and self-level modes only work with flybarless electronics. Names vary by brand, such as SAFE, VBar rescue or Spirit rescue.
How they fly
- Feel: flybarless control is usually crisper and more consistent.
- Efficiency: a flybarless head has fewer parts, less slop and less drag, so it’s more efficient. The gain in flight time is modest, and it varies.
- Stability: a flybar isn’t more stable for beginners than a modern flybarless unit with stabilization. Flybarless is the usual choice for learning.
Setup and maintenance
Flybar heads need the paddles level, the mixing arms and linkages set correctly, and regular checks for wear.
Flybarless units need:
- Correct mounting orientation and servo settings, including servo type and frame rate
- Servo centering and swashplate leveling
- Collective and cyclic limits, and tail limits
- Gain tuning
The tail side of the setup is covered in RC helicopter gyro setup.
Flybarless units are sensitive to vibration, so balanced blades and proper mounting pads matter. Flybarless electronics don’t fix poor mechanical setup, though. Slop and binding still cause problems, so check the mechanics first.
Rescue and self-level modes
Rescue and self-level modes help beginners recover when they lose orientation. They only exist on flybarless electronics, and they don’t replace learning to hover. A flybarless unit isn’t an autopilot: with rescue off, the pilot still does all the flying.
Where flybar still makes sense
Flybar isn’t obsolete. Some scale and vintage helicopters still use flybar heads. For many popular models, flybar-to-flybarless conversion heads exist, so you may be able to upgrade an older machine. Check compatibility before you buy a conversion.
If you’re buying a used helicopter, check whether it has a flybar or flybarless head, and whether a conversion is available for that model.
Common myths
- “A flybar is more stable for beginners.” A flybar isn’t more stable for beginners than a modern flybarless unit with stabilization.
- “Flybarless is an autopilot.” It isn’t. With rescue off, the pilot flies the helicopter.
- “A coaxial toy’s stabilizer bar is the same as a hobby flybar.” It isn’t. The mechanisms and setup are different.
- “Flybarless fixes mechanical problems.” It doesn’t. Slop and binding still cause problems.
Safety
- Do the flybarless direction checks (cyclic and tail correction) with the motor disarmed, before the first flight.
- Never move the helicopter while the flybarless unit is initializing at power-up.
- Turn the throttle hold on before you handle the helicopter.